Specification:

Model	CR-Tehc-R20C
Max Speed	17000CPH
Insert Direction	0～360°the increment is 1°
Pin Span	（Optional) 2.5; 2.5/5.0； 2.5/5.0/3.5(3.5 can option turn inside or outside)；2.5/5.0/7.5； 5.0/7.5/10.0 2.5/5.0/7.5/10.0
PCB Size	Minimum 50mm*50mm、Maximum 285mm*400mm
PCB Thickness	0.79～2.36mm
Conveyor Height	900mm
Conveyor Width	50mm-285mm(adjustable)
Component Specifications	maximum height 23mm, maximum diameter 13mm
Component Type	capacitor, transistor, triode, LED lamp, key switch, resistor, connector, coil potentiometer, fuse holder, fuse wire, and other vertical tape packaging material
Feeder Drive	Feeder Cylinder Drive
Base Lift Drive	Base Lift Cylinder Drive
Lead Length Tolerance	1.2/1.5/1.8 mm
Insert Bending Angle	10~35 degree outside bending
Feeder Capacity	20, optional（30，40，60，80，100）
Appearance Size	L1920xD1450xH1700 mm
Feeder Station Size	1800mm× 1450mm× 1100mm
Weight	1200kg
Power Supply	220V,AC（Single phase）50/60HZ,1.5KVA;
System Protection	Configure UPS
Power Consumption	1.5KW（Energy-saving type）
Air Supply Pressure	0.6MPA
Air Flow	0.3CBM/Min
Environmental Conditions	Ambient temperature 5~25 degrees
Machine noise:	60 decibels
Hole Correction Mode	Machine vision system
Drive system	AC servo AC motor
Data Input	USB interface input (EXCEL document format)
Control system	Chinese operating interface (WINDOWS system control platform) LCD display
Control Mode	Automatic, semi-automatic and Manual
Element Density	High density insertion mode
Feeding Mode	Motor feeding board left to right (optional right to left)
Programming Mode	Manual programming